When was the last time the roof of your building was inspected? If it’s been awhile, the roof could have problems lurking that require immediate attention. Some roof problems cause obvious signs such as for example leaks, while others produce subtle signs that are only detectable at first glance. In either case, leaving the problems unaddressed can cost you thousands when you finally repair them. If the roof on your own building has the problems listed below, a company that focuses on commercial roofing should repair them quickly:

Buckled Panels

Roof panels buckle because of weather damage and poor installation. Regardless of the cause, the buckling allows wind to blow within the panels, making them loose. As the problem worsens, the panels start to fall off, often coming off in large sections whenever a storm hits. Buckled panels are perhaps one of the most commonly fixed problems by companies that perform roof repair.

Expended Screw Holes

Expanded screw holes are another problem for panel roofs. Over time, wind and fluctuating temperatures cause the screw holes in panels to widen around the screws that hold the panels set up. This creates a space where water can leak underneath the panels and soak the roof deck. After the deck becomes saturated, the thing is costly to fix.

Blistering

Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although energy efficiency pose a problem, large ones can rupture and allow water to seep beneath the bitumen. Once the blisters form, warm weather typically makes them worse. As a result of humid subtropical climate in a few regions of the country, commercial roofing frequently experiences blistering.

Ponding Water

Blocked drains and improper sloping could cause water to assemble in small ponds on a roof. Repairing a blocked drain is easy, but fixing a sloping problem is more complex. Often, installing a taper insulation system to establish a new slope is best solution. Through the rainy season, resolving ponding water is one of the most common forms of roof repair.

Loose Flashing

Flashing prevents water from seeping in the crevice where the roof abuts to protrusions such as chimneys and vents. As time passes, most flashing should be resealed. If it’s not, leaks may cause serious damage the deck and building interior. Most flashing problems are corrected during scheduled maintenance.

Missing Mortar

Chimneys and high parts of brick walls that have sections of missing mortar could cause leaks. These leaks are often mistaken for leaks in the roof membrane, but an intensive inspection by a company that specializes in commercial roofing will reveal the true problem. Most parts of missing mortar could be repaired with basic tuck pointing procedures.

Conclusion

The problems above are some of the most common known reasons for roof repair. If they are corrected early, most problems are inexpensive to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is the greatest solution to ensure problems are detected early.